Title:

Inspect A 14 CFR Part 121 Certificate Holder’s Station Personnel Training Program/Course(s)

Number:

2.3.16.6

Validation Date: 5/17/05

Approval Date: 7/25/05

Comments:

 

Job Task Sponsor:

AFS-200

Job Series:

1825 Aviation Safety Inspector (Air Carrier Operations)

Function:

2.0 Surveillance/Inspection

Duty:

2.3 Air Operator Surveillance

Rating and Ranking

Difficulty:

Low

Importance:

Non-Critical

Time to Accomplish:

1 Day

Specialty

Frequency

OPS

On Demand

CSI

On Demand

DSI

Not Applicable

Course Numbers

21607

21621

21632

21429

21427

22602

 

 

 

 

PTRS Activity Codes

SAI

EPI

1626

 

 

 

 

 

4.2.6

 

 

 

 

 

 

 

 

 

 

Regulatory Requirements

Link to Specific Regulatory

Requirements (SRR)

121.135

121.401

121.429

121.433

121.459

121.629

121 Appendix I and J

 

Forms

FAA Form 8000-36, PTRS Data Sheet

 

Job Aids

Element Performance Inspection (EPI) Data Collection Tool (DCT) 4.2.6

 

Other Guidance

FAA Order  8900.1, Flight Standards Information Management System (FSIMS)

AC 120-60 (current edition), Ground Deicing And Anti-Icing Program

AC 121-29 (current edition), Carry-On Baggage

NOTE: Ensure you are using the most current information. The Flight Standards Information Management System (FSIMS) may be used to obtain current guidance.

 

TASK DESCRIPTION:

Observe the Certificate Holder’s Station Personnel training program/course(s) and compare the presentation to the Certificate Holder’s procedures, policies, and instructions outlined in their manuals. Document the results of the comparison and, in addition, any observed deficiencies in the Certificate Holder’s program.

 

SUBTASK 1:

Review and become familiar with FAA Station Personnel training guidance material.

Objective/Skill:

Performance:

·    Review the information listed in the supplemental information section contained in DCT 4.2.6.

·    Review the guidance and policy contained in FAA Order  8900.1, Vol. 6, Chap. 2, Secs. 21 & 24.

Conditions:

·    Using ATOS DCT EPI 4.2.6 (See Note Below)

·    FAA Order  8900.1, Vol. 6, Chap. 2, Secs. 21 & 24.

Standards:

·    Regulatory Requirements and Policy contained in the EPI 4.2.6, Section 1-Performance Observables.

·    IAW Guidance and Policy contained in FAA Order  8900.1, Vol. 6, Chap. 2, Secs. 21 & 24; AC 120-60 and AC 121-29.

Knowledge:

·    Understand the Regulatory Requirements and Policy contained in the EPI 4.2.6, Section 1-Performance Observables.

·    Understand the Guidance and Policy contained in FAA Order  8900.1, Vol. 6, Chap. 2, Secs. 21 & 24; AC 120-60 and AC 121-29.

NOTE: Job Task Item (JTI), as used in the SAI/EPI, refers to a specific item against which to check the design or performance of a Certificate Holder’s Program. JTIs are provided to assist you with the evaluation of the Certificate Holder’s Station Personnel Training Program/Course(s), and are located in the DCT.

SUBTASK 2:

Become familiar with the policies, procedures, and instructions for the station personnel training program contained in the Certificate Holder’s manual.

Objective/Skill:

Performance:

Review the policies, procedures and instructions for the station personnel training program contained in the Certificate Holder’s manual.

Conditions:

·    Using ATOS DCT EPI 4.2.6

·    Certificate Holder’s station personnel training program.

Standards:

·    Regulatory Requirements IAW EPI 4.2.6, Section 1-Performance Observables.

·    IAW Certificate Holder’s station personnel training program.

Knowledge:

·    Understand the Regulatory Requirements and Policy contained in the EPI 4.2.6, Section 1-Performance Observables.

·    Understand AC 120-60 and AC 121-29.

·    Understand the Certificate Holder’s Station Personnel Training Program.

 

SUBTASK 3:

Review the associated SAI with emphasis on the controls, process measurements, and interface attribute sections.

Objective/Skill:

Performance:

Review the Certificate Holder’s manual for controls required in EPI 4.2.6; Section 2-Management Responsibility and Authority Observables.

Conditions:

Using ATOS DCT EPI 4.2.6

Standards:

IAW EPI 4.2.6, Section 2-Management Responsibility and Authority Observables.

Knowledge:

·    Know how to apply the Management Responsibility and Authority Observables.

·    Understand the Guidance and Policy contained in FAA Order  8900.1, Vol. 10.

·    Understand the Certificate Holder’s Station Personnel Training Program.

·    Understand the controls, process measurements, and interface attributes in SAI 4.2.6.

 

SUBTASK 4:

Observe the Station Personnel training and compare the curriculum to the Certificate Holder’s published procedures and regulatory guidance.

Objective/Skill:

Performance:

Observe the Certificate Holder’s Station Personnel training program/course(s).

Conditions:

Using Station Personnel training program and Certificate Holder’s procedures.

Standards:

IAW the Certificate Holder’s Station Personnel training program.

Knowledge:

·    Understand the Regulatory Requirements and Policy contained in the EPI 4.2.6, Section 1-Performance Observables.

·    Understand the Guidance and Policy contained in FAA Order  8900.1, Vol. 6, Chap. 2, Secs. 21 & 24.

·    Understand AC 120-60 and AC 121-29.

·    Understand the Certificate Holder’s Station Personnel Training Program.

 

SUBTASK 5:

To determine if the person identified by the Certificate Holder having responsibility and/or authority for the Station Personnel training program is qualified, knowledgeable, and recognizes that responsibility and/or authority.

Objective/Skill:

Performance:

Conduct an interview.

Conditions:

Using ATOS DCT EPI 4.2.6, Section 2.

Standards:

IAW EPI 4.2.6, Section 2-Management Responsibility and Authority Observables.

Knowledge:

·    Know how to apply the Management Responsibility and Authority Observables.

·    Understand the Guidance and Policy contained in FAA Order  8900.1, Vol. 10.

 

SUBTASK 6:

Document the results of the observation and any additional deficiencies that have been discovered. Debrief the Certificate Holder and Principal Operations Inspector (POI).

Objective/Skill:

Performance:

Notify Certificate Holder, POI and populate the ATOS repository.

Conditions:

Results of the inspection.

Standards:

IAW FAA Order  8900.1, Vol. 6, Chap. 2, Secs. 21 & 24 and Vol. 10.

Knowledge:

·    Understand the Regulatory Requirements and Policy contained in the EPI 4.2.6.

·    Understand the Guidance and Policy contained in FAA Order  8900.1,

·    Vol. 6, Chap. 2, Sec. 21 & Sec. 24

·    Vol. 10

·    Understand AC 120-60 and AC 121-29.