Title:

Approve 14 CFR Part 121 Certificate Holder’s Deicing Program

Number:

3.3.57

Validation Date: 6/14/05

Approval Date: 7/25/05

Comments:

 

Job Task Sponsor:

AFS-200

Job Series:

1825 Aviation Safety Inspector (Air Carrier Operations)

Function: 

3.0 Certification

Duty:  

3.3 Air Operator Certification

Rating and Ranking

Difficulty:

High

Importance:

Critical

Time to Accomplish:

5  Days

Specialty

Frequency

OPS

On Demand

CSI

Not Applicable

DSI

On Demand

Course Numbers

21607

21621

21632

21429

 

PTRS Activity Codes

SAI

EPI

1302

1303

1306

1307

3.1.7

 

 

 

1310

1326

1327

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Regulatory Requirements

Link to Supplemental Regulatory

Requirements (SRR)

 

119.43

121.135

121.629

121.603

Ops Specs A023

 

Forms

FAA Form 8000-36     PTRS Transmittal Form

 

Job Aids

Safety Attribute Inspection (SAI) Data Collection Tool (DCT) 3.1.7

 

Other Guidance

FAA Order 8900.1                  Flight Standards Information Management System (FSIMS)

AC 20-117                              Hazards Following Ground Deicing And Ground Operations In             Conditions Conducive To Aircraft Icing

AC 91-51 (as amended)           Effect Of Icing On Aircraft Control And Airplane Deice And Anti-            Ice Systems

AC 120-58                              Pilot Guide Large Aircraft Ground Deicing

AC 120-60 (as amended)         Ground Deicing And Anti-Icing Program

 

NOTE: Ensure you are using the most current information.  The Flight Standards Information Management System (FSIMS) may be used to obtain current guidance.


 


TASK DESCRIPTION:

 

Determine that the Certificate Holder’s Deicing Program meets FAA regulatory requirements and policies including System Safety Attributes when applicable.  Identify and document any deficiencies in the Certificate Holder’s Deicing Program and ensure those deficiencies are corrected prior to p rogram approval.

 

SUBTASK 1:

 

Review and become familiar with FAA Deicing Program regulations and policies. 

Objective / Skill:

Performance: 

·            Review the information listed in the supplemental information section contained in DCT 3.1.7.

·        Review the policy and guidance contained in FAA Order 8900.1;

 

-            Vol. 3, Chap. 27, Sec. 1

-            Vol. 3, Chap. 27, Sec. 2

-            Vol. 3, Chap. 27, Sec. 3

 

Conditions:

·      Using ATOS DCT SAI 3.1.7 (See Note Below)

·        Review the policy and guidance contained in FAA Order 8900.1;

 

-            Vol. 3, Chap. 27, Sec. 1

-            Vol. 3, Chap. 27, Sec. 2

-            Vol. 3, Chap. 27, Sec. 3

 

Standards:

·            Regulatory Requirements IAW SAI 3.1.7, Sec. 1 - Procedures Attribute.

·        IAW guidance and policy contained in FAA Order 8900.1;

 

-            Vol. 3, Chap. 27, Sec. 1

-            Vol. 3, Chap. 27, Sec. 2

-            Vol. 3, Chap. 27, Sec. 3

 

Knowledge:  

·        Understand the Regulatory Requirements and Policy contained in the SAI 3.1.7, Sec. 1 - Procedures Attribute.

·        Understand the Guidance and Policy contained in FAA Order 8900.1;

 

-            Vol. 3, Chap. 27, Sec. 1

-            Vol. 3, Chap. 27, Sec. 2

-            Vol. 3, Chap. 27, Sec. 3

 

 

NOTE:  Job Task Item (JTI) – A specific item against which to check the design or performance of a Certificate Holder’s Program.   JTIs are provided to assist you with the evaluation of the Certificate Holder’s Deicing Program, and are located in the Data Collection Tools (DCT).

 

SUBTASK 2:

 

Review the Certificate Holder’s submission and ensure compliance with FAA regulations and policies.

ELEMENT 2.1:

 

Review the Certificate Holder’s submission and document any noted deficiencies..

Objective / Skill:

Performance: 

Review the Certificate Holder’s submission and identify any noncompliant issues/items.

Conditions:

·      Using ATOS DCT SAI 3.1.7.

·      Certificate Holder’s manuals.

Standards:

·      Regulatory Requirements IAW SAI 3.1.7, Sec. 1 – Procedures Attribute.

·        IAW FAA Order 8900.1;

 

-            Vol. 3, Chap. 27, Sec. 1

-            Vol. 3, Chap. 27, Sec. 2

-            Vol. 3, Chap. 27, Sec. 3

Knowledge:            

·        Understand the Regulatory Requirements and Policy contained in the SAI 3.1.7, Sec. 1 – Procedures Attribute.

·        Understand the Guidance and Policy contained in  FAA Order 8900.1;

 

-            Vol. 3, Chap. 27, Sec. 1

-            Vol. 3, Chap. 27, Sec. 2

-            Vol. 3, Chap. 27, Sec. 3

·        Understand AC 91-51, AC 20-117, AC 120-58, and AC 120-60.


 

ELEMENT 2.2:

 

Notify Certificate Holder of any deficiencies that require correction prior to program approval.

Objective / Skill:

Performance: 

Notify Certificate Holder of deficiencies requiring correction prior to program approval.

Conditions:

The list of deficiencies.

Standards:

·      Regulatory Requirements IAW SAI 3.1.7, Sec. 1 – Procedures Attribute.

·        IAW FAA Order 8900.1;

 

-            Vol. 3, Chap. 27, Sec. 1

-            Vol. 3, Chap. 27, Sec. 2

-            Vol. 3, Chap. 27, Sec. 3

Knowledge:

·        Know how to document deficiencies IAW guidance contained in  FAA Order 8900.1;

 

-            Vol. 1, Chap.1, Sec. 4

-            Vol. 1, Chap. 2, Sec. 2

-            Vol. 1, Chap. 2, Sec. 3

-            Vol. 3, Chap. 1, Sec. 1

-            Vol. 3, Chap. 2, Sec. 1

-            Vol. 3, Chap. 14, Sec. 1

-            Vol. 3, Chap. 18, Sec. 9

-            Vol. 14, Chap. 2, Sec. 1

 

 

 


SUBTASK 3:

 

Determine that the Certificate Holder’s manual contains the Controls, Process Measurements, Interfaces, and Management Responsibility and Authority Attributes.

ELEMENT 3.1:

 

Review the Certificate Holder’s manual to determine that the Controls, Process Measurements, Interfaces, and Management Responsibility and Authority Attributes have been incorporated into their manual(s).

Objective / Skill:

Performance: 

Review the Certificate Holder’s manual for controls required in SAI 3.1.7, Sec. 2, Sec. 3, Sec. 4, and Sec. 5.

Conditions:

Using ATOS DCT SAI 3.1.7

Standards:

IAW SAI 3.1.7, Sec. 2, Sec. 3, Sec. 4, and Sec. 5.

Knowledge:

·        Know how to apply the Attributes in SAI 3.1.7.

·        Understand the Guidance and Policy contained in FAA Order 8900.1, Vol. 10.


 

ELEMENT 3.2:

 

Ensure identified deficiencies are corrected.

Objective / Skill:

Performance: 

Notify Certificate Holder of deficiencies requiring correction. 

Conditions:

The list of deficiencies.

Standards:

Corrections must meet System Safety Controls Attribute and FAA Order 8900.1, Vol. 10.

Knowledge:

·        Know how to document deficiencies IAW guidance in FAA Order 8900.1, Vol. 10.

·        Understand the Guidance and Policy contained in SAI 3.1.7.

 

 

SUBTASK 4:

 

Approve and authorize the Certificate Holder’s Deicing Program.

Objective / Skill:

Performance: 

Issue letter of approval and coordinate the issuance of Ops Specs D095. 

Conditions:

Completed documentation.

Standards:

·      IAW SAI 3.1.7.

·      IAW FAA Order 8900.1, Vol. 4, Chap. 4, Sec. 7.

Knowledge:

·        Understand the Regulatory Requirements and Policy contained in SAI 3.1.7.

·        Understand the final approval guidance for Deicing Program procedures, IAW FAA Order 8900.1;

 

-            Vol. 1, Chap.1, Sec. 4

-            Vol. 1, Chap. 2, Sec. 2

-            Vol. 1, Chap. 2, Sec. 3

-            Vol. 3, Chap. 1, Sec. 1

-            Vol. 3, Chap. 2, Sec. 1

-            Vol. 3, Chap. 14, Sec. 1

-            Vol. 3, Chap. 18, Sec. 9

-            Vol. 4, Chap. 4, Sec. 7

-            Vol. 14, Chap. 2, Sec. 1