Unscoped DCT Report (Standard DCT)


MLF Label: 4.1.1 (ADG) HM Training of Maintenance Providers / Stores
DCT Type: ED DCT
Specialty: Operations
Peer Group: D - Part 135 (9 or Less Seats/Single Pilot)
DCT Revision: 2.0 on 06/25/17 (Released)
Summary Information

Purpose (Certificate Holder Responsibility): To identify and properly handle hazardous material COMAT.
Objective (FAA Responsibility): Determine if the CH will be able to; (1) Comply with regulations; (2) identify and properly handle Hazardous Material COMAT.




Questions Answers References
  4.1.1 (ADG) HM Training of Maintenance Providers / Stores
1   
Do procedures exist in enough detail to meet the regulatory and guidance requirements for this element to achieve the intended results?




NOTE: 

Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "121" OR "135") ,  Rev.  2  6/24/2017 11:56:37 PM, 

QID:
 00051223, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
2   
Is the individual with responsibility clearly identifiable and required to have the knowledge and qualifications necessary to plan, organize, direct and control activities for this element?




NOTE: 

Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "121" OR "135") ,  Rev.  2  6/24/2017 11:56:37 PM, 

QID:
 00051235, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
3   
Is the individual with authority clearly identifiable, and required to have the knowledge and qualifications necessary to direct, control, or change procedures, and make key decisions, such as safety risk acceptance, associated with this element?




NOTE: 

Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "121" OR "135") ,  Rev.  2  6/24/2017 11:56:37 PM, 

QID:
 00051236, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
4   
Does the training include adequate requirements for maintenance / stores personnel regarding hazardous materials COMAT?




NOTE: 

Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "121" OR "135") ,  Rev.  2  6/25/2017 12:01:22 AM, 

QID:
 00051310, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
5   
Do procedures specify actions to be taken by maintenance / stores personnel in the event of a hazardous materials emergency?




NOTE: 

Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "121" OR "135") ,  Rev.  2  6/25/2017 12:01:22 AM, 

QID:
 00051311, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
6   
Do controls exist to ensure processes associated with this element achieve the desired results?




NOTE: 

Safety Attribute: Controls,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "121" OR "135") ,  Rev.  2  6/24/2017 11:56:37 PM, 

QID:
 00051222, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No


Response Details List  EP & ED DCTs (Both OP and AW) (Released, 1.0)
1 Unclear procedure(s)
2 Conflicting procedure(s)
3 Used workaround(s)
4 Skipped process step(s)
5 Personnel failed to follow process (procedures, guidance, etc)
6 Procedures/guidance not available
7 Procedures/guidance not current
8 Inconsistent procedure(s)
9 Undocumented procedure(s)
10 Minor typographical error(s) (i.e. record entries)
11 Information missing
12 Communication failure(s)
13 Personnel failed to perform task
14 Process failed to meet desired outcome
15 Process oversight failure
16 Equipment/tools not available
17 Equipment/tools not adequate
18 Equipment/tools not calibrated
19 Facilities not adequate
20 Other