Unscoped DCT Report (Standard DCT)


MLF Label: 4.1.4 Training and Qualification
DCT Type: ED DCT
Specialty: Airworthiness
Peer Group: G - Part 145 Outside the U.S. without Aviation Safety Agreement
DCT Revision: 12.0 on 12/17/18 (Released)
Summary Information

Purpose (Certificate Holder Responsibility): To train all maintenance personnel.
Objective (FAA Responsibility): Determine if the CH will be able to; (1) Comply with regulations; (2) Train persons performing maintenance and inspections.


The Training and Qualification Subsystem includes the following Element(s)


Questions Answers References
  4.1.4 Training and Qualification
1   
Does the process design ensure the person with responsibility provides adequate resources (financial and human) for the safety and quality performance of this element?




Safety Attribute: Management Responsibility,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND (SAFETY PROGRAMS = "SMSVP") ,  Rev.  1  3/13/2018 11:30:21 AM, 

QID:
 00051929, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
AC-120-92, 8900.1 Vol 17 Ch 3 Sec 3
2   
Does the process design ensure the person with responsibility provides adequate resources (financial and human) for the safety and quality performance of this element?




Safety Attribute: Management Responsibility,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND ( NOT (SAFETY PROGRAMS = "SMSVP")) ,  Rev.  1  3/13/2018 11:30:22 AM, 

QID:
 00051943, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
3   
Is the person with authority clearly identifiable, qualified, and knowledgeable to effectively plan, direct and control resources; change procedures and make key determinations including safety risk acceptance decisions for this element?




Safety Attribute: Management Authority,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND (SAFETY PROGRAMS = "SMSVP") ,  Rev.  1  3/13/2018 11:30:21 AM, 

QID:
 00051930, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
AC-120-92, 8900.1 Vol 17 Ch 3 Sec 3
4   
Is the person with authority clearly identifiable, qualified, and knowledgeable to effectively plan, direct and control resources; change procedures and make key determinations including safety risk acceptance decisions for this element?




Safety Attribute: Management Authority,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND ( NOT (SAFETY PROGRAMS = "SMSVP")) ,  Rev.  1  3/13/2018 11:30:22 AM, 

QID:
 00051944, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
5   
Are there process measures that provide for the monitoring and measuring of safety performance related to this element?




Safety Attribute: Process Measurement,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND (SAFETY PROGRAMS = "SMSVP") ,  Rev.  1  3/13/2018 11:30:21 AM, 

QID:
 00051931, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
AC-120-92, 8900.1 Vol 17 Ch 3 Sec 3
6   
Are there process measures that provide for the monitoring and measuring of safety performance related to this element?




Safety Attribute: Process Measurement,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND ( NOT (SAFETY PROGRAMS = "SMSVP")) ,  Rev.  1  3/13/2018 11:30:23 AM, 

QID:
 00051945, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
7   
Do the procedures require the training program to:

      #1 Consist of initial and recurrent training; and
      #2 Be FAA-approved?



Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  5  2/27/2018 8:48:49 AM, 

QID:
 00004252, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10, 145.163(a)
8   
Do the procedures require employees assigned to perform maintenance, preventive maintenance, alterations, and inspection functions to be capable of performing the assigned tasks?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  6  2/27/2018 8:48:49 AM, 

QID:
 00004255, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10, 145.163(b)
9   
Do the procedures specify who is responsible for revising the training program and submitting revisions to the FAA?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:49 AM, 

QID:
 00004256, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-9, 145.209(e)
10   
Do the procedures specify how the Repair Station approves training program revisions and when revisions are submitted to the FAA?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:49 AM, 

QID:
 00004257, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-9, 145.209(e)
11   
Do the procedures specify how often the training program will be reviewed for currency and completeness?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:49 AM, 

QID:
 00004258, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-9
12   
Do the procedures specify who is responsible for reviewing the training program?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  6  2/27/2018 8:48:49 AM, 

QID:
 00004259, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-9
13   
Do the procedures specify how training programs revisions will be:

      #1 Recorded;
      #2 Implemented; and
      #3 Identified?



Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  5  2/27/2018 8:48:49 AM, 

QID:
 00004260, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-9
14   
Do the procedures specify how the revised text will be identified?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:50 AM, 

QID:
 00004264, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-9
15   
Do the procedures require each certificated supervisor overseeing work to be trained in or thoroughly familiar with:

      #1 Methods;
      #2 Techniques;
      #3 Practices;
      #4 Aids;
      #5 Equipment; and
      #6 Tools?



Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  7  12/17/2018 1:04:38 PM, 

QID:
 00004265, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 13, 145.153(b), AC-145-9A
16   
Do the procedures specify how to design each of the training program's areas of study and individual classes?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:50 AM, 

QID:
 00004272, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
17   
Do the procedures require that employee training records be maintained for 2 years?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  6  2/27/2018 8:48:51 AM, 

QID:
 00004274, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10, AC-145-9, 145.163(c)
18   
Do the procedures require that records show the abilities of its non-certificated employees performing maintenance functions based on training, knowledge, experience, or practical tests?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) AND ( PERSONNEL = "NONCERTIFICATED REPAIR PERSONNEL" ) ,  Rev.  4  2/27/2018 8:48:50 AM, 

QID:
 00004275, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10, 145.151(d)
19   
Do the procedures require instructors to be evaluated on their qualifications for a subject area, including:

      #1 Formal training and experience, as applicable; and
      #2 The ability to impart information on the particular subject matter?



Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  5  2/27/2018 8:48:50 AM, 

QID:
 00004283, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
20   
Do the procedures require that training records include:

      #1 The employee's name and job position;
      #2 Training requirements determined by the needs assessment, including indoctrination (initial and recurrent) and other training required by areas and course titles;
      #3 FAA certificates applicable to the qualifications (e.g., supervisors, RII personnel, and persons approving articles for return to service must be certificated under 14 CFR Part 65);
      #4 Other certifications, diplomas, and degrees;
      #5 Authorizations and qualifications (if not covered by 14 CFR Part 65 certificates);
      #6 Proof of training course completion, if determined applicable to capabilities; and
      #7 On-the-job training?



Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  5  2/27/2018 8:48:50 AM, 

QID:
 00004286, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
21   
Do the procedures require that training records include a list of accomplished training, including the:

      #1 Course title or description;
      #2 Course objective;
      #3 Date completed;
      #4 Test results;
      #5 Total hours and location of training;
      #6 Name of instructor and instructor qualifications; and
      #7 Employee signature?



Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  5  2/27/2018 8:48:51 AM, 

QID:
 00004294, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
22   
Do the procedures require employees to receive initial and recurrent indoctrination?




NOTE: Training should cover the regulations and the Repair Station’s operations, policies, and procedures.

Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:51 AM, 

QID:
 00004302, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
23   
Do the procedures require employees to receive initial technical skills training for new tasks?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:51 AM, 

QID:
 00004303, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
24   
Do the procedures require employees to receive recurrent technical training for specific tasks or functions to ensure currency in existing or added capabilities?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:51 AM, 

QID:
 00004304, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
25   
Do the procedures require specialized technical training or advanced training for specific tasks or functions to ensure all employees performing maintenance remain capable of performing assigned tasks?




NOTE: Areas that may require specialized training include flame or plasma spray operations, special inspection or test techniques, special machining operations, complex welding operations, aircraft inspection techniques, and complex assembly operations.

Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:51 AM, 

QID:
 00004305, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
26   
Do the procedures require remedial technical training to correct demonstrated lack of skill or knowledge deficiencies?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:51 AM, 

QID:
 00004306, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
27   
Do the procedures require that measurement of program effectiveness includes a method to determine whether employees are able to perform assigned tasks?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  4  2/27/2018 8:48:52 AM, 

QID:
 00004307, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
28   
Does the training program include initial and recurrent training on maintenance human factors?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  3  2/27/2018 8:48:49 AM, 

QID:
 00004308, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
29   
Does the training program ensure that the operator's CAMP training requirements are met?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) AND ( OTHER CERTIFICATES OR APPROVALS = "PERFORMS AIR CARRIER MAINTENANCE" ) ,  Rev.  6  2/27/2018 8:48:52 AM, 

QID:
 00004309, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, 145.205
30   
Does the training program include training for personnel assigned to perform inspection functions?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  6  2/27/2018 8:48:53 AM, 

QID:
 00004310, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10, 145.163
31   
Does the training program specify overall training requirements, including:

      #1 What tasks are associated with each position responsible for performing maintenance, preventive maintenance, or alterations;
      #2 What skills, experience, and training of new and current employees are required;
      #3 How to assess employees being assigned new tasks;
      #4 How employees will return to tasks after extended periods;
      #5 How to introduce new regulations, procedures, equipment, and recordkeeping requirements; and
      #6 How to prepare for changes in the nature of basic capabilities?



Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  5  2/27/2018 8:48:52 AM, 

QID:
 00004317, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
32   
Does the training program include an employee training needs assessment that includes:

      #1 Conducting objective and consistent assessments;
      #2 Documenting assessments in individual training records;
      #3 Providing individuals to conduct assessments who are qualified to evaluate assessment results; and
      #4 Monitoring individuals to ensure they perform tasks consistently at an acceptable level and assigning recurrent or remedial training if necessary?



Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  5  2/27/2018 8:48:52 AM, 

QID:
 00004324, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, AC-145-10
33   
Does the certificate holder have procedures to determine the ability to understand, read and write English for the following personnel:

      #1 Supervisors;
      #2 Inspectors; and
      #3 Persons authorized to approve an article for return to service?



Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) ,  Rev.  6  6/25/2018 1:07:04 PM, 

QID:
 00004329, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 13, AC-145-10, 145.153(c), 145.155(b), 145.157(c), AC-145-9A
34   
Does the training program ensure that the Operator's training requirements are met before performing line maintenance?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "145" ) AND ( OPSPEC = "D107" ) ,  Rev.  4  2/27/2018 8:48:52 AM, 

QID:
 00004333, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
8900.1 Vol 6 Ch 9 Sec 14, D107, 145.205(d)
35   
Do procedures exist in enough detail to meet the regulatory and guidance requirements for this element to produce the intended results?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND (SAFETY PROGRAMS = "SMSVP") ,  Rev.  1  3/13/2018 11:30:20 AM, 

QID:
 00051926, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
36   
Do procedures exist in enough detail to meet the regulatory and guidance requirements for this element to produce the intended results?




Safety Attribute: Procedures,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND ( NOT (SAFETY PROGRAMS = "SMSVP")) ,  Rev.  1  3/13/2018 11:30:22 AM, 

QID:
 00051940, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
  Not Applicable
37   
Do risk controls exist within this element to mitigate unacceptable levels of risk(s)?




Safety Attribute: Controls,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND (SAFETY PROGRAMS = "SMSVP") ,  Rev.  1  3/13/2018 11:30:20 AM, 

QID:
 00051927, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
AC-120-92, 8900.1 Vol 17 Ch 3 Sec 3
38   
Do risk controls exist within this element to mitigate unacceptable levels of risk(s)?




Safety Attribute: Controls,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND ( NOT (SAFETY PROGRAMS = "SMSVP")) ,  Rev.  1  3/13/2018 11:30:21 AM, 

QID:
 00051941, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
39   
Does the certificate holder have a method to evaluate the impact of changes on related processes (interfaces) for this element?




Safety Attribute: Interfaces,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND (SAFETY PROGRAMS = "SMSVP") ,  Rev.  1  3/13/2018 11:30:21 AM, 

QID:
 00051928, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
40   
Does the certificate holder have a method to evaluate the impact of changes on related processes (interfaces) for this element?




Safety Attribute: Interfaces,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND ( NOT (SAFETY PROGRAMS = "SMSVP")) ,  Rev.  1  3/13/2018 11:30:22 AM, 

QID:
 00051942, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
41   
Do procedures require individuals be competent in their safety related duties as it relates to safety performance of this element?




Safety Attribute: Safety Ownership,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND (SAFETY PROGRAMS = "SMSVP") ,  Rev.  1  3/13/2018 11:30:21 AM, 

QID:
 00051932, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No
AC-120-92, 8900.1 Vol 17 Ch 3 Sec 3
42   
Do procedures require individuals be competent in their safety related duties as it relates to safety performance of this element?




Safety Attribute: Safety Ownership,  Question Type: Output Validation,  

Scoping Attribute:
  (FAR PART = "135" OR "145") AND ( NOT (SAFETY PROGRAMS = "SMSVP")) ,  Rev.  1  3/13/2018 11:30:23 AM, 

QID:
 00051946, Response Details: EP & ED DCTs (Both OP and AW),  Status: Released

  Yes
  No


Response Details List  EP & ED DCTs (Both OP and AW) (Released, 1.0)
1 Unclear procedure(s)
2 Conflicting procedure(s)
3 Used workaround(s)
4 Skipped process step(s)
5 Personnel failed to follow process (procedures, guidance, etc)
6 Procedures/guidance not available
7 Procedures/guidance not current
8 Inconsistent procedure(s)
9 Undocumented procedure(s)
10 Minor typographical error(s) (i.e. record entries)
11 Information missing
12 Communication failure(s)
13 Personnel failed to perform task
14 Process failed to meet desired outcome
15 Process oversight failure
16 Equipment/tools not available
17 Equipment/tools not adequate
18 Equipment/tools not calibrated
19 Facilities not adequate
20 Other
Response Details List  N/A Response Detail (Released, 1.0)
1 Operator not authorized by OpSpecs
2 Equipment not equipped/authorized
3 Not applicable due to exemption, deviation, or exception
4 Not authorized by regulation
5 Not authorized by Order
6 Not authorized by Notice
7 Not authorized/recommended by Advisory Circular
8 Not authorized by Policy Letter, Legal Interpretation, or other guidance
9 Other